Riello RX 300 S/PV User Manual

Name: Riello RX 300 S/PV
Brand: Riello
Rating: 4 (1 reviews)

56 pages

To Next Page

20062175 (3) - 02/2015

Installation, use and maintenance instructions

Premixed gas burners

Progressive two-stage or modulating operation

CODE MODEL

20064445 RX 180 S/PV

20055507 RX 250 S/PV

20060003 RX 300 S/PV

20059983 RX 300-33 S/PV

Table of Contents3
Information and General Warnings5
Information about the Instruction Manual5
Introduction5
General Dangers5
Other Symbols5
Delivery of the System and the Instruction Manual6
Guarantee and Responsibility6
Owner's Responsibility7
Safety and Prevention8
Introduction8
Personnel Training8
Technical Description of the Burner9
Technical Data9
Electrical Data9
Packaging - Weight - Approximate Measurements10
Burner Dimensions10
Burner Description11
Burner Equipment11
Firing Rates12
Burner Controls (LME7115
Indication of Diagnostics Mode20
Installation21
Notes on Safety for the Installation21
Handling21
Preliminary Checks22
Operating Position22
Preparing the Boiler23
Boring the Boiler Plate23
Head Length23
Probe - Electrodes Positioning24
Securing the Burner to the Boiler25
Fuel Supply26
Air/Gas Mixer26
Gas Train27
Electrical Wiring28
Supply Cables and External Connections Passage29
Opening Sequence of the Fuse-Holder30
Start-Up, Calibration and Operation of the Burner31
Notes on Safety for the First Start-Up31
Adjustments before First Firing31
Burner Start-Up31
Fan Adjustment32
Matching the Working Points "Speeds for Low-Fire (P1), Ignition Load (P0) and High-Fire (P2) for the Heating Engineer32
To the Application32
Burner Shut down34
Gas Valve Adjustment34
Burner Adjustment34
Optimum Calibration Values34
Check of Modulating Operation35
Display of Preset Output35
Load Controller Inputs35
5.10 Factory Wiring Diagram36
Maintenance38
Notes on Safety for the Maintenance38
Maintenance Programme38
Maintenance Frequency38
Checking and Cleaning38
Recommended Preventive Maintenance Schedule41
Opening and Closing the Burner41
Operation, Indication, Diagnostics42
Control Sequence in the Event of Fault42
Fault Status Messages, Display of Errors42
Display of Errors (Faults) with Lockout42
Error Code List with Operation Via Internal LED43
Resetting the Burner Control44
Operation44
Manual Adjustment44
Diagnostics of Cause of Fault46
First Startup with a New Program Module or in Case of Replacement of Program Module47
Manual Restore48
Errors During the Restore Process49
Reset49
A Appendix - Spare Parts50
Appendix - Accessories52
Appendix - Burner Start up Report53

Questions and Answers:

Need help?

Do you have a question about the Riello RX 300 S/PV and is the answer not in the manual?

Riello RX 300 S/PV Specifications

General

Brand	Riello
Model	RX 300 S/PV
Category	Burner
Language	English

Related product manuals

Riello RX 300 S/PV User Manual

Table of Contents

Questions and Answers:

Riello RX 300 S/PV Specifications

Related product manuals