Need help?Do you have a question about the Riello RX 150 S/PV and is the answer not in the manual?
Describes the modulating operational mode of the burner.
Details on how to use and understand the instruction manual.
Explains the three levels of danger indicated by warning symbols.
Explains various warning symbols used in the manual for safety.
Instructions for delivering the burner system and its manual to the user.
Outlines the manufacturer's guarantee terms and limitations of responsibility.
General information on burner design, regulations, and potential risks.
Requirements and responsibilities for qualified personnel operating the burner.
Lists the available models of the Riello burner.
Details the components included with the burner.
Provides key technical specifications such as power, fuel, and operating conditions.
Lists electrical specifications including supply voltage, fan motor, and protection level.
Shows the physical dimensions of the burner with a diagram.
Describes the main components and parts of the burner assembly.
Details the burner control system and its safety features.
Explains how to interpret diagnostic signals and indicator lights.
Critical safety precautions to be observed during burner installation.
Guidelines for safely handling the burner during unpacking and positioning.
Procedures for checking the burner consignment and its identification label.
Specifies the allowed installation positions for the burner.
Instructions for preparing the boiler for burner installation.
Details on drilling holes in the boiler plate for mounting.
Guidance on selecting the correct combustion head length.
Correct positioning of the ionisation probe and electrode.
Steps for physically mounting the burner onto the boiler.
Information and safety precautions regarding the burner's fuel supply line.
Procedures for adjusting the gas flow rate via the gas valve.
Safety instructions and guidelines for electrical wiring of the burner.
Essential safety precautions for the initial burner start-up.
Steps required for adjustments before igniting the burner.
How to adjust fan speed for modulating operation.
Explains the two operating modes for burner start-up.
Detailed guide for the initial manual start-up procedure.
Procedure for backing up settings and parameters.
Troubleshooting steps for errors encountered during the backup process.
Adjusting fan speed for modulation via control box parameters.
Procedures for optimizing burner calibration using flue gas analysis.
Recommended CO2 and O2 values for optimal combustion.
Description of the combustion head and its features.
Lists and explains programmable safety and operating parameters.
Final verification steps after the burner has started and is operating.
Crucial safety precautions for performing maintenance tasks.
Overview of the recommended maintenance schedule and tasks.
Recommended intervals for checking the gas combustion system.
Procedure for a safety test with the gas supply shut off.
Routine checks and cleaning procedures for burner components.
Details on safety components and their replacement life cycles.
Instructions and safety measures for opening and reassembling the burner.
A detailed schedule of preventive maintenance tasks and their frequency.
Describes how the burner responds to various fault conditions.
A comprehensive list of error codes and their possible causes.
Procedures for resetting the burner control after a lockout.
Method for diagnosing the root cause of a burner fault using indicator lights.
Steps for installing or replacing the burner's program module.
Procedure for performing a manual reset of the burner control.
Information on errors that may occur during the reset procedure.
Final step to reset the unit after error diagnosis or procedure.
Describes the modulating operational mode of the burner.
Details on how to use and understand the instruction manual.
Explains the three levels of danger indicated by warning symbols.
Explains various warning symbols used in the manual for safety.
Instructions for delivering the burner system and its manual to the user.
Outlines the manufacturer's guarantee terms and limitations of responsibility.
General information on burner design, regulations, and potential risks.
Requirements and responsibilities for qualified personnel operating the burner.
Lists the available models of the Riello burner.
Details the components included with the burner.
Provides key technical specifications such as power, fuel, and operating conditions.
Lists electrical specifications including supply voltage, fan motor, and protection level.
Shows the physical dimensions of the burner with a diagram.
Describes the main components and parts of the burner assembly.
Details the burner control system and its safety features.
Explains how to interpret diagnostic signals and indicator lights.
Critical safety precautions to be observed during burner installation.
Guidelines for safely handling the burner during unpacking and positioning.
Procedures for checking the burner consignment and its identification label.
Specifies the allowed installation positions for the burner.
Instructions for preparing the boiler for burner installation.
Details on drilling holes in the boiler plate for mounting.
Guidance on selecting the correct combustion head length.
Correct positioning of the ionisation probe and electrode.
Steps for physically mounting the burner onto the boiler.
Information and safety precautions regarding the burner's fuel supply line.
Procedures for adjusting the gas flow rate via the gas valve.
Safety instructions and guidelines for electrical wiring of the burner.
Essential safety precautions for the initial burner start-up.
Steps required for adjustments before igniting the burner.
How to adjust fan speed for modulating operation.
Explains the two operating modes for burner start-up.
Detailed guide for the initial manual start-up procedure.
Procedure for backing up settings and parameters.
Troubleshooting steps for errors encountered during the backup process.
Adjusting fan speed for modulation via control box parameters.
Procedures for optimizing burner calibration using flue gas analysis.
Recommended CO2 and O2 values for optimal combustion.
Description of the combustion head and its features.
Lists and explains programmable safety and operating parameters.
Final verification steps after the burner has started and is operating.
Crucial safety precautions for performing maintenance tasks.
Overview of the recommended maintenance schedule and tasks.
Recommended intervals for checking the gas combustion system.
Procedure for a safety test with the gas supply shut off.
Routine checks and cleaning procedures for burner components.
Details on safety components and their replacement life cycles.
Instructions and safety measures for opening and reassembling the burner.
A detailed schedule of preventive maintenance tasks and their frequency.
Describes how the burner responds to various fault conditions.
A comprehensive list of error codes and their possible causes.
Procedures for resetting the burner control after a lockout.
Method for diagnosing the root cause of a burner fault using indicator lights.
Steps for installing or replacing the burner's program module.
Procedure for performing a manual reset of the burner control.
Information on errors that may occur during the reset procedure.
Final step to reset the unit after error diagnosis or procedure.
General| Power Output | 150 kW |
|---|---|
| Ignition Type | Electronic |
| Air Pressure Switch | Yes |
| Control Box | Integrated |
| Voltage | 230V |
| Fuel Type | Natural Gas |
| Burner Type | Monoblock |
| Operation | Modulating |
| Firing Rate (kW) | 150 |
| Burner Output | 150 kW |
To Next Page
