24
Shackmaster™ Power 500 DC Power Supply Instruction Manual
Service Functions
The REAMP companion software allows you to configure
the device to make it convenient for you to work with it.
To go to customization mode,
click the Device Settings button.
Customizing device settings
In the settings window that opens you can set the following parameters:
Whether to use a special gesture to quickly turn the device on or off, what to do
after the mains failure, do Power 500 need to turn off if it is not used for a long
time. As the power supply has a built-in ultra-precise real-time clock,
you can set the power supply to turn on and off depending on the time of day.
Whether it is necessary to show the clock on the device display when it is turned off.
Which information screens should be shown and what information should be
displayed on each of them. You can enable sequential display of all configured
screens to see everything that is happening in the equipment connected to the
power supply.
To Next Page