Rigol DS1000U Series User Programming Manual

Chapter 2 Command System RIGOL
MSO7000/DS7000 Programming Guide 2-117
:POWer Commands
Command List:
 :POWer:TYPE
 :POWer:CURRentsource
 :POWer:VOLTagesource
 :POWer:QUALity:FREQREFerence
 :POWer:REFLevel:METHod
 :POWer:REFLevel:PERCent:HIGH
 :POWer:REFLevel:PERCent:LOW
 :POWer:REFLevel:PERCent:MID
:POWer:TYPE
Syntax
:POWer:TYPE <type>
:POWer:TYPE?
Description
Sets or queries the power analysis type.
Parameter
Name
Type
Range
Default
<type>
Discrete
{QUALity|RIPPle}
QUALity
Description
 QUALity: By analyzing the power quality, you can test the quality of AC input lines.
 RIPPle: indicates the ripple quantity of the output DC voltage.
Return
Format
The query returns QUAL or RIPP.
Example
:POWer:TYPE RIPPle /*Sets the power analysis type to RIPPle.*/
:POWer:TYPE? /*The query returns RIPP.*/
:POWer:CURRentsource
Syntax
:POWer:CURRentsource <source>
:POWer:CURRentsource?
Description
Sets or queries the current source of power quality.
Parameter
Name
Type
Range
Default
<source>
Discrete
{CHANnel1|CHANnel2|CHANnel3|CHANnel4}
CHANnel1
Return
Format
The query returns CHAN1, CHAN2, CHAN3, or CHAN4.
Example
:POWer:CURRentsource CHANnel2 /*Sets the current source to CH2.*/
:POWer:CURRentsource? /*The query returns CHAN2.*/

Rigol DS1000U Series Specifications

General

Brand	Rigol
Model	DS1000U Series
Category	Test Equipment
Language	English