Rigol DS1000U Series User Programming Manual

RIGOL Chapter 2 Command System
2-16 MSO7000/DS7000 Programming Guide
:BUS<n>:RS232 (Option)
The :BUS<n>:RS232 commands are used to set relevant parameters for RS232 decoding.
Command List:
 :BUS<n>:RS232:TX
 :BUS<n>:RS232:RX
 :BUS<n>:RS232:POLarity
 :BUS<n>:RS232:ENDian
 :BUS<n>:RS232:BAUD
 :BUS<n>:RS232:DBITs
 :BUS<n>:RS232:SBITs
 :BUS<n>:RS232:PARity
 :BUS<n>:RS232:PACKet
 :BUS<n>:RS232:PEND
:BUS<n>:RS232:TX
Syntax
:BUS<n>:RS232:TX <source>
:BUS<n>:RS232:TX?
Description
Sets or queries the TX channel source of RS232 decoding.
Parameter
Name
Type
Range
Default
<n>
Discrete
{1|2|3|4}
——
<source>
Discrete
{D0|D1|D2|D3|D4|D5|D6|D7|D8|
D9|D10|D11|D12|D13|D14|D15|
CHANnel1|CHANnel2|CHANnel3|CHANnel4|OFF}
OFF
Return
Format
The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,
D15, CHAN1, CHAN2, CHAN3, CHAN4, or OFF.
Example
:BUS1:RS232:TX D0 /*Sets the TX channel source of RS232 decoding to D0.*/
:BUS1:RS232:TX? /*The query returns D0.*/
:BUS<n>:RS232:RX
Syntax
:BUS<n>:RS232:RX <source>
:BUS<n>:RS232:RX?
Description
Sets or queries the RX channel source of RS232 decoding.
Parameter
Name
Type
Range
Default
<n>
Discrete
{1|2|3|4}
——
<source>
Discrete
{D0|D1|D2|D3|D4|D5|D6|D7|D8|
D9|D10|D11|D12|D13|D14|D15|
CHANnel1|CHANnel2|CHANnel3|CHANnel4|OFF}
OFF
Return
The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,

Rigol DS1000U Series Specifications

General

Brand	Rigol
Model	DS1000U Series
Category	Test Equipment
Language	English