RIGOL
User’s Guide for DS1000B Series
2-11
Figure 2-11 Table 2-5 The Filter menu
Menu Settings Comments
Digital Filter
ON
OFF
Turn on the digital filter.
Turn off the digital filter.
Filter Type
Setup as LPF (Low Pass Filter).
Setup as HPF (High Pass Filter).
Setup as BPF (Band Pass Filter).
Setup as BRF (Band Reject Filter).
Upper
Limit
[1]
<frequency>
Turn (
) knob to set upper limit
high limit.
Lower
Limit
[1]
<frequency>
Turn (
) knob to set lower limit.
Back to higher level menu (The
followings are the same, no more
explanation).
NOTE:
[1] The upper limit needs to be set in the type of low pass filter.
The lower limit needs to be set in the type of high pass filter.
Both upper limit and lower limit need to be set in the types of band pass filter and band reject
filter.
To Next Page
Loading...
