RIGOL
16 MSO1000Z/DS1000Z Quick Guide
Display: press this key to enter display setting menu to set the display type,
persistence time, wave intensity, grid type and grid brightness.
Utility: press this key to enter the system function setting menu to set the
system-related functions or parameters, such as the I/O, sound and language.
Besides, some advanced functions (such as the pass/fail test, waveform record, etc.)
are also supported.
Print
Press this key to print the screen or save the screen to a USB
storage device.
― If a PictBridge printer is connected currently and the
printer is in idle state, pressing this key can print the
screen.
― If no printer is connected but a USB storage device is
inserted, pressing this key can save the screen to the USB
storage device in “.png” format. When the storage type is
picture, you can store the screen image to the USB
storage device in the specified picture format.
―
If both a printer and a USB storage device are connected,
the printer enjoys higher priority when pressing this key.
To Next Page
Loading...
