RIGOL Chapter 20 System Utility Function Setting
20-6 MSO5000 User Guide
Press HDMI to enter the HDMI setting menu.
âš« Press Output continuously to enable or disable the video output.
➢ ON: You can connect the instrument to an external display via this interface
to better observe the waveform display clearly from the external display.
➢ OFF: disables the interface.
âš« Press Resolution to set the screen resolution. The available resolution includes
640x480, 720x480, and 1280x720.
USB Connection
The oscilloscope can communicate with a PC via the USB DEVICE interface on the
rear panel. No parameters are required to be configured.
To Next Page
Loading...
Need help?
General
