RindaTechnologies TechMate Pro - Tool Setup; LCD Contrast; English; Metric Units; MAP Type

Tool Setup
Page 10
Settings
e settings menu, as shown in Figure 3 on the prior page, is accessed by choos-
ing “Tool Setup” from the main menu. e menu contains items that allow you
to access and adjust various features of the scan tool as detailed below.
LCD Contrast
Allows the scanner’s display contrast to be adjusted. Please note that the display’s
readability is aected by both ambient lighting conditions and temperature. Use
the screen adjustment feature as necessary to produce a suitable amount of con-
trast for your viewing purposes.
English / Metric Units
Causes data related to pressure, temperature and velocity to be displayed in En-
glish or Metric units.
MAP Type
For MEFI-2 thru MEFI-4 EFI systems only. Adjusts MAP readings to accom-
modate 1 atmosphere and 2 atmosphere MAP sensors. Use 2 ATM setting only
when working on MEFI-2 thru MEFI-4 equipped supercharged engines.
Fuel Scaling
For MEFI-1 and 2 EFI systems only. Use Merc MEFI-1 Scaling only when
working on older MerCruiser engines equipped with MEFI-1 or MEFI-2 EFI
systems.
Tool Information
Displays the scan tool’s soware revision information and serial number.
Set Time / Date
Used to adjust the current time and date stored in the tool’s internal real-time
clock. e TechMate Pro maintains the current time and date via a built-in
clock circuit which is power by a replaceable CR2032 coin cell battery. Battery
life is approximately 5 to 7 years.
Display Time / Date
Displays the tool’s current time and date.
SD Card
Reserved for future expansion.