Ringway TD90 - Reverb Level; Chorus

(Chorus): Press [ENTER]:
Use data dial or buttons to select (Chorus Type) and
(Chorus Level) .
[+] and [-]
ENTERENTER
(Reverb Level): Press [ENTER] button:
Use data dial or buttons to select reverb level. Range: 000-127.
To confirm this selection, press [ENTER] again, and the content of LED-
display will return to the mode.
[+] and [-]
ENTERENTER
(Chorus Type): Press [ENTER]:
Use data dial or buttons to select chorus type.(Chorus1, Chorus2,
Chorus3, Chorus4, Feedback, Flanger, ShortDly, FBDelay).
Reference: "Content of LED-display" on Page 31.
To close the chorus effect, please select .
To confirm this selection, press [ENTER] again, and the content of LED-
display will return to the mode.
[+] and [-]
ENTERENTER
21
6.2.1.2 Reverb Level
6.2.2 Chorus
6.2.2.1 Chorus Type
Electronic Drum