Ringway TD90 - Drum Pad Assembly; Cymbal and Hi-hat Assembly

5
4
Insert the left and right support
arm into the rack clamp.
Tighten the set-screw.
Drum Pad Assembly
1
1.Insert the rod into the pad hole,
set to a fine- position and tighten
the screw.
2.Insert the pad rod into rack
clamp, set to a fine- position
and tighten the T-screw.
Cymbal and Hi-hat Assembly
Insert the cymbal stand(longer)
into the rack clamp and tighten
the T-screw.
1
Electronic Drum