Need help?Do you have a question about the Rinnai 2001 and is the answer not in the manual?
General| Brand | Rinnai |
|---|---|
| Model | 2001 |
| Category | Gas Heater |
| Language | English |
Highlights the main attributes of the Rinnai 2001 heater, including its heating system, controls, and ignition.
Covers unpacking, included parts, general installation requirements, and clearances for the heater.
Specific steps for installing the heater into a fireplace, covering dimensions, flue, and base preparation.
Details on removing the inlet union, gas connection position, and running the gas supply for fireplace installation.
Instructions for sliding the heater, installing radiants, checking for escapes, and sealing the gas supply cover.
Steps for installing the console unit into a 75mm cavity wall with a twin skin flue system.
Instructions for lowering the flue, fitting supports, sealing plates, adapters, and securing the heater.
Guidance on closing off the fireplace, removing baffles, and preparing the fireplace for installation.
Instructions for using an inbuilt appliance connected to a twin skin flue system for timber frame openings.
Step-by-step guide on how to ignite the pilot light and the main burner of the heater.
Instructions for igniting and modulating the main burner based on room temperature settings.
Guidance on increasing and decreasing the room temperature using the control knob.
Procedures for turning the main burner off (pilot on) and turning the heater completely off.
Instructions for cleaning the 2 burner filters and the sensor filter to maintain heater efficiency.
Guidance on cleaning the heater's outer casing using appropriate methods and materials.
Crucial safety warnings and usage restrictions for operating the heater, including clearances and child safety.
Details the warranty coverage for the Heat Exchanger, Fan, and other parts of the Rinnai 2001.
Explanation of the Overheat Switch, Flame Failure Device, and Automatic Fan Delay Switch.
A diagnostic chart to help identify and resolve common problems with the Rinnai 2001 heater.
Steps for testing the unit after installation, including checking burner pressure and flame appearance.
Guidance on instructing the customer on the proper use of the heater, including ignition and controls.
Schematic showing the electrical connections and components of the Rinnai 2001 heater.
Provides detailed physical dimensions for both the inbuilt and console versions of the heater.
Lists detailed technical data including input, gas control, burner type, flue, and power supply.
Provides contact details for Rinnai Australia's sales, spare parts, and service departments.
To Next Page