To Next PageTo Next Page
Need help?Do you have a question about the Rinnai Blaze 21 and is the answer not in the manual?
General| Model Name | Blaze 21 |
|---|---|
| Weight | 12.4 kg |
| Gas Type | Natural Gas / LPG |
| Ignition System | Electronic |
| Fuel Type | Gas |
Details the terms and conditions for the two-year Rinnai warranty coverage.
Illustrates the physical components and features of the Avenger, Blaze, Dynamo, and Enduro models.
Explains the function of each button and indicator on the control panel for different models.
Details the operation of the remote control, including buttons, battery replacement, and important notes.
Describes features like Push Button Ignition, Child Lock, Filter Indicator, and Economy Function.
Covers Remote Control, Pre-Heat, Memory, and Dual Timers specific to these models.
Details Memory, Delay On Timer, and Off Timer features for the Enduro model.
Crucial safety warnings regarding children, supervision, and preventing misuse of the heater.
Safety instructions on preventing objects from being inserted into the heater's louvres.
Advises against using the heater in areas with paint fumes, fluff, dust, or aerosols.
Specifies the required power connection and warns against using power boards or double adaptors.
Instructions on proper shutdown procedure, including fan cycling and not unplugging during operation.
Advises on cleaning filters when the warning indicator is on to prevent overheating.
Instructions for checking the appliance for damage upon unpacking and contacting the supplier if necessary.
Key checks and requirements before installation, including gas type, regulations, and ventilation.
Diagram and text indicating necessary spatial clearances for safe operation.
Recommendation to use a mat to prevent floor covering discolouration from heat.
Specifies minimum room sizes for different models and how to calculate room volume.
Prohibits use in specific room types due to safety and ventilation concerns.
Explains how to connect the gas supply via the bayonet fitting.
Step-by-step guide to turn the heater on using the control panel or remote control.
Instructions on how to change the desired temperature using control panel or remote buttons.
Guide on how to turn off the heater using the control panel or remote control, noting fan cycling.
Explains the energy-saving Economy mode, its function, and how to activate/cancel it.
Introduces the system for setting the clock and programming dual timers.
How to view the currently set clock time on the display.
Step-by-step process to set the current time, including AM/PM.
Guide to setting the 'On' and 'Off' times for the first timer program.
Instructions for setting the 'On' and 'Off' times for the second timer program.
How to select and manage Timer 1 and Timer 2 operation, including indicators and cancellation.
Explains the automatic pre-heating function that ensures the room is warm by the programmed start time.
How to manually override timer settings and regain full control, including cancellation.
Details how to set a delay for the heater to turn on, up to 24 hours in advance.
Instructions for setting a 60-minute timer for the heater to turn off automatically.
How to activate and deactivate the child lock feature to prevent accidental operation.
Lists and briefly explains various safety mechanisms like Over heat switch, Fuse, Flame failure sensor, etc.
Importance of clean air filters for heating effectiveness and warning about the filter indicator.
Step-by-step guide on how to remove and clean the air filters.
Recommendations for regular servicing and who should perform repairs.
A chart to help diagnose common issues and suggest possible remedies.
Explains the self-diagnostic system and lists error codes with probable causes and suggested remedies.
Provides general technical details about the heaters, including gas control, connection, ignition, and safety devices.
Lists model-specific dimensions and weights, along with gas input and supply pressure data.
