EasyManua.ls Logo

Rinnai Blaze 21 - Rinnai Enduro Timer Operation; Rinnai Enduro Delay On Timer; Rinnai Enduro 60-Minute Off Timer

Rinnai Blaze 21
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TIMER OPERATION - ENDURO
OPERATING THE ON TIMER
The Delay On Timer allows you to delay the start time of the heater for up to 24 hours.
To operate, press the On Timer button . The On Timer indicator will illuminate and the
Combustion indicator will be illuminated green to confirm that the heater is awaiting for the Delay
‘on’ time period to pass before commencing operation. The Delay On timer indicator will also
illuminate and the current Delay On Time period will be displayed on the Digital (Temp / Time) display
for 60 seconds. Whilst displayed, the Delay On time can be adjusted by pressing the Up or Down
buttons . A delay time of up to 9½ hours can be set in increments of 30 minutes and a delay time
of up to 24 hours
in increments of 60 minutes.
When the programmed Delay ‘On’ time period has passed, the heater will automatically begin
operation.
OPERATING THE OFF TIMER
The Off Timer allows you to set a 60 minute delay before the heater will automatically turn off.
To operate, press the Off Timer button . The Off Timer indicator will illuminate and the
Combustion indicator will be illuminated red to confirm that the heater will continue operation until
the Delay ‘off’ time period has passed after which it will stop. The Delay Off time is 60 minutes. When
this time has passed, the heater will automatically stop operation and the Off Timer indicator will
flash.
During Off Timer operation full manual control of the heater is available.
The delay ‘On’ time last programmed is stored in the memory and will be the default
until it is re-adjusted.
If the On Timer button is pressed whilst the heater is in operation the On Timer will
override manual operation.
The Off Timer and On Timers work independently of each other. However, if both
timers are operating and the Delay On time period is 30 minutes, the Delay Off Timer
will override the Delay On Timer.
12
36
31
34
35
13
2
35 36
12
34
31
13
NOTE
35
12
38
33
31
37
13
2
37 38
12
38
NOTE
After the Off timer operation is completed press the ON/OFF button twice to
restart the heater.
The heater will continue to operate for a period of 60 minutes. On Timer operation can
be cancelled by pressing either the ON/OFF button or the Off Timer button .
37
37
Rinnai Operation Manual14

Related product manuals