To Next PageTo Next Page
Need help?Do you have a question about the Rinnai CAPELLA 18Plus and is the answer not in the manual?
Guidelines for installing the heater, including room size, ventilation, and placement.
Heats room using gas convection, continuous adjustment to maintain SET temperature.
Heats room using gas convection, lowers SET temp by 2°C after 30 mins if maintained.
Heats room using gas, lowers SET temp by 2°C after 30 mins, gas starts/stops automatically.
Heats room using gas or gas/electric convection, electric used for cold rooms or high heat load.
Heats room using gas/electric, lowers SET temp by 2°C after 30 mins if maintained.
Heats room using gas/electric, lowers SET temp by 2°C after 30 mins, gas starts/stops automatically.
Heats room using electric convection, element switches on/off automatically.
Heater operates up to an hour before programmed start time to reach desired temperature.
Details on operating the heater remotely via the control unit, including standby and on functions.
Details on safety features like Over Heat, Fuse, Flame Failure, Oxygen Depletion, Tilt Switch, and Power Failure.
Information on cleaning air filters to maintain heater effectiveness and prevent overheating.
Provides the physical dimensions of the Rinnai heater in millimeters.
Detailed electrical wiring diagram for the Rinnai heater, including component labels and color codes.
Functional block diagram illustrating the Rinnai heater's internal circuits and component connections.
Guidelines for installing the heater, including room size, ventilation, and placement.
Heats room using gas convection, continuous adjustment to maintain SET temperature.
Heats room using gas convection, lowers SET temp by 2°C after 30 mins if maintained.
Heats room using gas, lowers SET temp by 2°C after 30 mins, gas starts/stops automatically.
Heats room using gas or gas/electric convection, electric used for cold rooms or high heat load.
Heats room using gas/electric, lowers SET temp by 2°C after 30 mins if maintained.
Heats room using gas/electric, lowers SET temp by 2°C after 30 mins, gas starts/stops automatically.
Heats room using electric convection, element switches on/off automatically.
Heater operates up to an hour before programmed start time to reach desired temperature.
Details on operating the heater remotely via the control unit, including standby and on functions.
Details on safety features like Over Heat, Fuse, Flame Failure, Oxygen Depletion, Tilt Switch, and Power Failure.
Information on cleaning air filters to maintain heater effectiveness and prevent overheating.
Provides the physical dimensions of the Rinnai heater in millimeters.
Detailed electrical wiring diagram for the Rinnai heater, including component labels and color codes.
Functional block diagram illustrating the Rinnai heater's internal circuits and component connections.
General| Model | CAPELLA 18Plus |
|---|---|
| Category | Gas Heater |
| Heat Output | 18 kW |
| Ignition | Electronic Ignition |
| Width | 400 mm |
| Fan Assisted Convection | Yes |
| Gas Type | Natural Gas |
| Safety Features | Flame Failure Device |
