EasyManua.ls Logo

Rinnai Avenger 25 User Manual

Rinnai Avenger 25
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
This appliance shall be installed in accordance with:
• Manufacturers Installation Instructions
• Current AS/NZS 3000 & AS/NZS 5601
• Local Regulations and Municipal Building Codes
This appliance must be installed, serviced and repaired by an Authorised Person.
Portable Unflued Gas
Convection Heater
Operation Manual
To Suit Models
Avenger 25
Dynamo 15
Enduro* 13
N10378
*
Enduro Model is for Australia only
Question and Answer IconNeed help?

Do you have a question about the Rinnai Avenger 25 and is the answer not in the manual?

Rinnai Avenger 25 Specifications

General IconGeneral
Gas TypeNatural Gas or LPG
IgnitionElectronic
Maximum Gas Input (NG)25 MJ/h
Maximum Gas Input (LPG)25 MJ/h
Remote ControlYes
Child LockYes
Dual TimersYes
Low EmissionsYes
ThermostatYes
Heating Capacity25, 000 BTU/h
Safety FeaturesFlame Failure Device, Overheat Switch, Tilt Switch
Heat Output25, 000 BTU/h

Summary

PORTABLE HEATER INTRODUCTION

CONTROL PANEL OVERVIEW

Details the function of each button and indicator on the heater's control panel.

SAFETY AND OPERATIONAL GUIDELINES

GENERAL SAFETY PRECAUTIONS

Provides crucial warnings about children, placement, and avoiding obstructions.

OPERATIONAL HAZARDS AND WARNINGS

Warns against using in specific areas and with flammable materials or aerosols.

ELECTRICAL AND USAGE GUIDELINES

Advises on dedicated power points, avoiding liquids, and proper shutdown procedures.

INSTALLATION AND SETUP PROCEDURES

UNPACKING AND PRE-INSTALLATION CHECKS

Covers checking for damage, not modifying the unit, and what's included in the box.

INSTALLATION REQUIREMENTS AND CLEARANCES

Details gas type confirmation, local regulations, power requirements, and prohibited locations.

BASIC HEATER OPERATION

TIMER OPERATION (AVENGER & DYNAMO MODELS)

TIMER FUNCTIONS (* ENDURO MODEL)

LOCK AND SAFETY DEVICES

BUILT-IN SAFETY DEVICES

Lists and briefly explains various safety mechanisms like overheat switch and flame failure sensor.

CARE AND MAINTENANCE GUIDE

TROUBLESHOOTING COMMON FAULTS

Provides a checklist to diagnose common issues and suggest remedies.

UNDERSTANDING ERROR CODES

Lists error codes, probable causes, and suggested remedies for faults.

Related product manuals