Rinnai Continuum Series User Manual

REU-2532FFU Series 21 Rinnai
R
innai Continuum and Integrity Water
Heaters
Dip Switch Default Settings
The settings below are factory default settings. Please ensure the model number and gas type of the
unit you have, matches the model number and gas type listed below; before settings any switches. If
you need assistance, contact Rinnai at (800)621-9419 before proceeding.
Residential Units Residential Units
REU-2532-FFU REU-2532-FFU
Propane Gas Model Natural Gas Model
Dip Switch Settings: Dip Switch Settings:
(SW1) (SW2) (SW1) (SW2)
#1 = Off #1 = Off #1 = Off #1 = On
#2 = On #2 = Off #2 = On #2 = Off
#3 = Off #3 = Off #3 = Off #3 = Off
#4 = Off #4 = Off #4 = Off #4 = Off
#5 = Off #5 = Off
#6 = Off #6 = Off
#7 = Off #7 = Off
#8 = Off #8 = Off
Commercial Units Commercial Units
REU-2532-FFU-C REU-2532-FFU-C
Propane Gas Model Natural Gas Model
Dip Switch Settings: Dip Switch Settings:
(SW1) (SW2) (SW1) (SW2)
#1 = Off #1 = Off #1 = Off #1 = On
#2 = On #2 = Off #2 = On #2 = Off
#3 = Off #3 = Off #3 = Off #3 = Off
#4 = Off #4 = On #4 = Off #4 = On
#5 = Off #5 = Off
#6 = Off #6 = Off
#7 = Off #7 = Off
#8 = Off #8 = Off

Rinnai Continuum Series Specifications

General

Type	Tankless
Fuel Type	Natural Gas or Propane
Maximum Water Pressure	150 PSI
Installation	Indoor or Outdoor
Maximum BTU Input	199, 000 BTU/hr
Electrical Requirements	120V
Warranty	5 years parts, 1 year labor