How to troubleshoot Rinnai Indoor Fireplace with no heat?
If your Rinnai Indoor Fireplace is not producing heat, ensure that the thermostat is set higher than the current room temperature. Also, the ESC (Electronic Safety Control) might have been activated. If so, reset the ESC following the procedure outlined.
How to fix Rinnai ES750 Indoor Fireplace that won't turn on?
If your Rinnai Indoor Fireplace won't turn on, first ensure it's properly plugged into the power supply and switched on. Also, check that the main switch on the appliance is activated. If these steps don't resolve the issue, there might be a fuse fault in the plug, and you should contact an electrician for assistance.
What to do if Rinnai Indoor Fireplace turns off too soon?
If your Rinnai Indoor Fireplace turns off before reaching the set temperature, it might be due to the open window detection feature. Please check if any windows in the room are open. Alternatively, the remote control might be in another room; relocate it to the same room as the appliance.
Why Rinnai ES750 Indoor Fireplace remote control doesn't work?
If your Rinnai Indoor Fireplace remote control isn't working, start by replacing the batteries. If that doesn't solve the problem, the remote may not be synced with the appliance. Ensure the appliance is turned on, then re-sync the remote by pressing the - and + buttons simultaneously for three seconds.
General| Category | Indoor Fireplace |
|---|---|
| Venting | Direct Vent |
| Fuel Type | Natural Gas or Propane |
| Ignition System | Electronic Ignition |
| Ignition | Electronic |
To Next Page