Rinnai IB35R User Manual

Flame Fire
Operating and Installation Instructions
Inbuilt Royale (Australia)
Timberflame IB35R (New Zealand)
Table of Contents
Customer Instructions
Operation
Safety Points
Troubleshooting
Installation Instructions
Location
Flueing
Gas Connection
Log Installation
Testing & Commissioning
Technical Data
Service Contacts
Installation Checklist
Installer Details
IMPORTANT
This appliance shall be installed in accordance with:
•Manufacturers Installation Instructions.
• Local Gas fitting regulations.
• Municipal Building codes.
• AGA Gas Installation Code AG601 - NZ 5261.
• Any other relevant statutory regulation.
• Rinnai strongly recommend that this product be installed with an
approved flue system for optimum product performance.
• This appliance must only be installed, serviced and removed by an
authorised person.
• For Australian installation, this appliance must be installed with
the supplied wire dressguard.
This heater is NOT designed to be built directly into any combustible
opening.
For combustible opening installations, a Rinnai Zero Clearance Kit is
available from your Gas Appliance Retailer.
2
3
4
5
6
8
9
10
11
11
12
12

Rinnai IB35R Specifications

General

Brand	Rinnai
Model	IB35R
Category	Indoor Fireplace
Language	English

Summary

Customer Instructions

Operation

Details on how to operate the Rinnai Flame Fire appliance for optimal use and user satisfaction.

Safety Points

Essential safety precautions and guidelines to ensure safe installation and operation of the appliance.

Troubleshooting

Guidance for identifying and resolving common issues encountered with the appliance.

Installation Instructions

Location

Guidelines and requirements for selecting an appropriate and safe installation location for the heater.

Flueing

Detailed criteria and recommendations for the correct installation and performance of the flue system.

Gas Connection

Step-by-step instructions for safely connecting the appliance to the gas supply.

Log Installation

Procedure for correctly installing the decorative logs and ember bed material for aesthetic and functional purposes.

Testing & Commissioning

Procedures for testing burner pressure, ignition, and commissioning the appliance after installation.

Technical Data

Key technical specifications, dimensions, and diagrams for the Rinnai Flame Fire appliance.

Service Contacts

Contact information for Rinnai Australia and New Zealand for service and support inquiries.

Installation Checklist

A checklist for certified gas installers to verify all installation steps have been correctly completed.

Installer Details

Section for recording certified installer and company information for the installation.