Space Heating Mode.
The space heating mode is to maintain the indoor
temperate at the set temperature while the
temperature sensor detects the indoor
temperature. When a user sets the indoor
temperature, the space heating supply water
temperat
ure is set and the boiler starts to operate.
The default heating mode is the space heating
mode.
Operation
Flow temperature mode
The flow temperature mode is detecting the
heating supply water temperature.
A user can manually adjust the heating supply
water temperature.
The default flow temperature is 55℃.
The default spaceheating temperature is 22℃.
Flow temperature mode( + )
To change the CH mode operation and then,
hold both the outgoing button and the reservation
button for 3 seconds.
There are two heating modes: Space heating mode and flow temperature mode.
9
To Next Page
Loading...
Need help?
General
