Rinnai RHFE-551FT Installation Insrtuctions

RHFE-551FT
FORCED FLUE HEATER
CUSTOMERS OPERATING
INFORMATION
AND
INSTALLATION INSTRUCTIONS
.‘I.
This appliance shall be installed in accordance with:-
Manufacturer’s Installation Instructions
Local Gas Fitting Regulations
Municipal Building Codes
GANZ Installation Code for Gas Burning Equipment
Any other relevant Statutory Regulation
This appliance must be installed, serviced and removed by an
Authorised Person.
Rinnai
wp
GAS SPACE HEATERS

Rinnai RHFE-551FT Specifications

Power

input power	22 MJ/h
electrical supply	230 V, 50 Hz

Gas Specifications

gas inlet	R1/2/15 (1/2” BSP MALE)
test point pressure N.G.	0.94 kPa
test point pressure LPG	2.75 kPa