51
[ ] Dual Time:
This function is very useful should you travel away
from home to another time zone.
LIGHT FUNCTION:
In any MODE you can simply push the LIGHT button and the whole screen
will light up and stay on for 3 seconds.
SETTING INSTRUCTIONS
All instructions start from Normal Time mode. Use the MODE button to
find the function you wish.(Note: You have 30 seconds to complete each
setting, if longer is taken the watch automatically returns to the prior setting
and you must start again.)
SETTING NORMAL TIME AND DATE:
• Press firmly the LAP/RESET. The Seconds will flash.
Return the Seconds to 00 by hitting the START/STOP.
• Push MODE the Minute will flash. Advance the
Minute with START/STOP until correct. (For quick
advance hold in the START/STOP button)
• Push MODE the Hour will flash. Advance the Hour with START/STOP
until correct.
• Push MODE the Year will flash. Advance the Year with START/STOP
until correct.
• Push MODE the Month will flash. Advance the Month with START/STOP
until correct.
• Push MODE the Day will flash. Advance the Day with START/STOP until
correct.
• Push MODE the Time (Both Hour and Minute) will flash. Select 12-HR
(normal AM/PM time display) or 24-HR (military time display) with START/
STOP until correct.
When all new settings are done, you must push the LAP/RESET button to
save.
To Next Page
Loading...
