Installation and Programming Manual
3-76
ACCESSORIES: ADD/DELETE MODULE (cont’d)
Quick Key Item Default Explanation
ADD/DELETE
MODULE (cont’d)
---
7 1 1 Keypad (cont’d) NONE ASSIGNING A PARTITION:
using the keypad’s [1] through [8] keys, assign
“Keypad 01” to the desired partition
note that “non-partitioned” systems are regarded
as “Partition 1”
press [ENTER] to have your choice accepted
ASSIGNING PARTITION ACCESSIBILITY
at this display:
use the UP- or DOWN-arrow keys to position the
cursor beneath the numbers of any and all partition(s)
for which it’s desired that this keypad display its alarms
and its entry/exit delay countdowns
(along with related
piezo beeps)
for each such partition, use the [STAY] key to toggle
between “Y” (YES) and“” (NO), in terms of such
accessibility
press [ENTER] to repeat the process for any other
keypads in the system; up to the system’s maximum
of 16
once done, press the [.] key to return to the
previous programming level
INSTALLER PROG:
7)ACCESSORIES
↓
SSIGN TO PAR:
KEYP=01 PAR= 1
P=12345678 KP=xx
YYYYYYYY MASK
To Next Page
Loading...
