Installation and Programming Manual
3-48
CODE MAINTENANCE: GRAND MASTER
CODE MAINTENANCE: INSTALLER
Quick Key Item Default Explanation
4 3 GRAND MASTER 1234 the Grand Master is the UserCode with the highest
Authority Level (see page 3-46)
the system’s owner/chief user can assign and modify
the Grand Master code as a function of the User
Functions mode; alternatively, the Grand Master’s
code may be set by the installation company
to do so, use the keypad’s (0-9) keys and, if
necessary, the UP- and DOWN-arrow keys, to
overwrite the default code; press [ENTER] when
done
4 4 INSTALLER 0224 the Installer Code allows entry into the
Installer Programming mode, and the subsequent
modification of all system parameters
it’s wise to change the factory default of “0224” to a
designation unique to the panel and/or to the
appropriate alarm company personnel; to do so:
1. use the keypad’s (0-9) keys and, if necessary, the
UP-and DOWN-arrow keys,to overwrite the default
code; press [ENTER]
2. carefully confirm your selection by re-entering the
same code and pressing [ENTER]
3. once done, press the [.] key to return to the previous
level.
INSTALLER PROG:
4)CODE MAINT.
↓
To Next Page
Loading...
