EasyManua.ls Logo

Risco Pro-24 - Page 82

Risco Pro-24
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation and Programming Manual
3-56
DIALER: CONTROLS (cont’d)
Quick Key Item Default Explanation
CONTROLS (cont’d)
5 5 10 Answering Machine
Override
Not for UL
Installations
YES if YES:
enables the Answering Machine Override–a feature
used to present an answering machine at the
customer’s premises from interfering with remote
Upload/Download operations
if enabled, the following sequence occurs whenever
a remote communication session is initiated:
the Upload/Download software at the alarm
company calls the account with which remote
communication is desired
the software hangs up after one ring is generated
the Pro-24 interprets the single ring as an instruction
to answer, on the first ring, the next phone call
occurring within one minute
within one minute of its initial call, the U/D Software
calls the account again
the Pro-24 picks up this call on the first ring,
thus bypassing any interaction with the answering
machine
remote communication can subsequently take place
if NO:
remote communication takes place in the standard
manner (see page 3-55 for details)
5 5 11 UL Installation NO if YES:
disables features inappropriate for UL Listed
installations
if NO:
no features are disabled
5 5 12 Show Kissoff NO if YES:
all five LEDs on the right side of the keypad(s) will light
for one second when the dialer, after successfully
transmitting data to the monitoring facility, receives the
“kissoff” signal from the Central Station’s receive
r
if NO:
there will be no annunciation of the “kissoff” signal
when received by the diale
r
5 5 13 Show Handshake NO if YES:
all five LEDs on the right side of the keypad(s) will light
for one second when the dialer, after connecting with
the monitoring facility, receives the “handshake” signal
from the Central Station’s receive
r
if NO:
there will be no annunciation of the “handshake” signal
when received by the dialer
5 5 14 Audible Kiss off NO if YES:
there will be an audible annunciation when the dialer,
after successfully transmitting data to the monitoring
facility, receives the “kissoff” signal from the Central
Station’s receive
r
if NO:
there will be no audible annunciation of the “kissoff”
signal
INSTALLER PROG:
5)DAILER

Related product manuals