3.2.4. Output Option selection menu
After entering in the “OUTPUT OPTIONS”, List of following parameters will be displayed :-
3.2.4.1 RELAY-1
3.2.4.2 RELAY-2
3.2.4.3 ANALOG-1
3.2.4.4 ANALOG-2
3.2.4.1 Relay1 output Selection menu
This screen applies to the Relay1 Output option Selection .
Touching any option will open screens of parameters
Touch on “ key” will take back to Output
Options screen.
related to that option.
3.2.4.1.1 Pulse output
After entering in the “RELAY-1 OUTPUT”, List of following parameters will be displayed.
3.2.4.1.1.1 ENERGY
3.2.4.1.1.2 PULSE DURATION
3.2.4.1.1.3 PULSE RATE
These settings are used to assign Relay1 in Pulse output mode.
OUTPUT OPTIONS
LINE-NEUTRAL VOLTAGE
VL2
VL2VL2
V
0.000
0.000
LINE-NEUTRAL VOLTAGE
VL2
VL2VL2
V
0.000
0.000
LINE-NEUTRAL VOLTAGE
VL2
VL2VL2
V
0.000
0.000
CT SECONDARY
5 AMPERE
1 AMPERE
LINE-NEUTRAL VOLTAGE
VL2
VL2VL2
V
0.000
0.000
LINE-NEUTRAL VOLTAGE
VL2
VL2VL2
V
0.000
0.000
LINE-NEUTRAL VOLTAGE
VL2
VL2VL2
V
0.000
0.000
RELAY-1 PULSE OUTPUT
OUTPUT OPTIONS
ENERGY : NONE
PULSE DURATION : 200
PULSE RATE : 10
18
To Next Page
Loading...