RisingHF RHF2S208 - Loriot Server Integration

V1.1 2018-10-9
www.risinghf.com
RHF2S208 User Manual
RisingHF
30
1. Replace global_conf_xxx.json with the real file name
2. Use
`ls -l /opt/risinghf/pktfwd`
command to check which frequency plan is contained in
/opt/risinghf/pktfwd
3. Physical frequency which is supported by RHF2S208 is decided by the hardware. For
example RHF2S208xxx-470 only support 470MHz frequency band, doesn’t support 433MHz,
868MHz etc...
4. Other undocumented channels plans, user could calculate each channel frequency
according to the previous description.
CH
eu868
us915
eu433
cn780
as920
cn470
0
867.1
902.3
433.175
779.5
923.2
470.3
1
867.3
902.5
433.375
779.7
923.4
470.5
2
867.5
902.7
433.575
779.9
923.6
470.7
3
867.7
902.9
433.775
780.1
923.8
470.9
4
867.9
903.1
433.975
780.3
924.0
471.1
5
868.1
903.3
434.175
780.5
924.2
471.3
6
868.3
903.5
434.375
780.7
924.4
471.5
7
868.5
903.7
434.575
780.9
924.6
471.7
8
868.3
BW250
SF7
903.0
BW500
SF8
OFF
OFF
OFF
OFF
9
868.8
FSK
50Kbps
OFF
OFF
OFF
OFF
OFF
5.1.4 Start Packet Forwarder service
Execute commands below to start pktfwd service:
sudo systemctl enable pktfwd
sudo systemctl restart pktfwd
5.1.5 Stop Packet Forwarder service
Execute commands below to stop pktfwd service:
sudo systemctl disable pktfwd
sudo systemctl stop pktfwd
5.2 Loriot Server( loriot.io )
Loriot is a LoRaWAN server supplier based at Switzerland, Loriot server supply free test account for
user. Main site http://www.loriot.io. Please note, free account has some limitation like active downlink,
OTAA etc.
Please read online documentation before get started. (Subdomain name will be different if you use
other region servers)
https://cn1.loriot.io/home/documentation.html