Added Model specification
FW 1.00.07 official release version
PoE is supported by default.
Added images to package contents
Added the requirement of VCA : MSXML4.0
Added Operation the OSD menu
Added Setting the Image Attribute
Changed the VCA specification
FW 1.02.02 official release version
Added the Cross Reference
Added S/N ratio
Corrected Errata about Network Protocol
Changed Minimum Illumination specification
Added LAN cable specification for PoE
Added power consumption data for PoE
FW v1.06.02 updated
Removed VCA contents from the Specification
section
Added hexadecimal-decimal conversion table
FW v1.06.03 updated
Changed ActiveX installation method for viewing web
page
Changed the default value for web server protocol
from https to http
Changed specification table to have a separate table
for Material Condition
Added LED indicator information
Changed the MSXML error message
Changed the operating temperature specification
Corrected the supported resolution