3.PART NAMES
3.1.Internal View
1. 11 pin terminal block for D/I, D/O, audio, and serial communication
11 pin terminal block for D/I, D/O, Audio in /Out and serial communication.
Refer to the section “5.1.Connectors” for more specific information.
2. Reset
Reset switch is used for restarting or resetting the camera to Factory Default
(FD). Refer to the section “
6.3. Reset” for more specific information.
3. Micro SD Card Socket
It is a memory card slot for external storage.
* Models herein and their
appearance are subject to change
without any prior notice.
To Next Page
Loading...
