VINYL JUNKIES WANTED:
Phono Mode
Adds up to 9dB of gain to the speaker’s output to account for the
inherently weaker signal coming from a turntable with built-in phono
preamp or traditional turntable with external phono preamp. This mode
also bypasses the automatic gain control in the DSP for the auxiliary
input, providing a clean, uncompressed signal to the amplifier. No other
Bluetooth speaker has the capability to play vinyl like this!
To use with turntable with low audio output, plug in aux cable and hold
down and for 3 seconds. Bluetooth light will turn orange.
13
TABLE OF CONTENTS
To Next Page
Loading...
