RiverRidge TWO DOOR SPACESAVER - Assembly Step 1; Assembly Step 2

STEP 1
STEP 1
1.Screw 4 cam bolts (A) into the pre-threaded holes on the top board (1) by using a Philips
screwdriver.
2. Insert 4 wood dowels (C) into the dowel holes on the top board (1).
3. Attach the magnet (D) to the top board (1).
4. Insert 2 screws (O) through holes on the magnet (D) then tighten to top board (1) by using a Philip
screwdriver.
STEP 2
STEP 2
1.Screw 4 cam bolts (A) into the pre-threaded holes on the middle connection board (2) by using a
Philips screwdriver.
2.Insert 4 wood dowels (C) into the dowel holes on the middle connection board (2).