RIX Industries MAN-2PS2B-N2 Page vii
Compressor Specifications
This document is valid for the following RIX compressor(s):
2PS2B-N2—models 2PS-L-N2, 2PS-L50-N2, 2PS-H-N2, 2PS-H50-N2 & 2PS-HH-N2
Design Specifications
Cylinder Size(s): 1 ¼” & ½”
Stroke Length: 2”
Motor Power: 1 ½ HP
Rotation: Clockwise from flywheel side
Nominal Compressor Speed: 2PS-L-N2: 190 RPM
2PS-L50-N2: 190 RPM
2PS-H-N2: 390 RPM
2PS-H50-N2: 390 RPM
2PS-HH-N2: 390 RPM
Input Power:
2PS-L: 115VAC/1PH/60HZ
2PS-L50: 220VAC/1PH/50HZ
2PS-H: 115VAC/1PH/60HZ
2PS-H50: 220VAC/1PH/50HZ
2PS-HH: 230VAC/1PH/60HZ
Gas Input
Gas to be compressed: Nitrogen, clean and dry
Suction Pressure Range: 30 to 70 psig
Suction Temperature Range: 0 to 100 °F
Gas Output
Nominal Flow Rate: 2PS-L-N2: 30 SCFH** @ 30 psig, 70°F Suction
2PS-L50-N2: 30 SCFH** @ 30 psig, 70°F Suction
2PS-H-N2: 60 SCFH** @ 30 psig, 70°F Suction
2PS-H50-N2: 60 SCFH** @ 30 psig, 70°F Suction
2PS-HH-N2: 60 SCFH** @ 30 psig, 70°F Suction
Discharge Pressure: 2200 psig maximum
**Design basis of SCFH is 70°F and 14.7 psia
Operating Environment
Installation: Indoors
Ambient Temperature: 32 to 104 °F
Altitude: Sea Level to 4500’
To Next Page
Loading...