RKC INSTRUMENT AE500 - Page 13

3. SETTING FOR COMUNICATION
IMAE02-E3
7
2. Press the shift key to change the display from character to set value.
3. Set the device address. Press the UP key to enter 5 in the lowest digit.
4. Press the shift key to brightly light the tens digit.
Continued on the next page.
SET
ALM4ALM1 ALM2
ALM3
SET
ALM4ALM1 ALM2
ALM3
SET
ALM4ALM1 ALM2
ALM3
SET
Character display of device address Set value display of device address
ALM4ALM1 ALM2
ALM3