RKC INSTRUMENT AE500 - Communication Speed Setting

3. SETTING FOR COMUNICATION
IMAE02-E3
9
3.4 Communication Speed Setting
Set a communication speed of 2400 bps, 4800 bps, 9600 bps or 19200 bps by using numerals from 0
to 3. Press the UP or DOWN key to change the numeral.
Symbol Name Setting range Description
Factory
set value
Communication
speed
0: 2400 bps
1: 4800 bps
2: 9600 bps
Selects the communication
speed.
2
bPS
3: 19200 bps
Set the same communication speed to both the AE500 and connecting host computer.
When the communication parameter was changed, always turn on the power again.
Otherwise, no communication is performed by using the changed value.
If key operation is not performed for more than 1 minute without pressing the SET key after
the device address is set, the AE500 is automatically changed to PV display. In this case, the
set communication speed returns to the value before the setting is changed.



Setting procedure
Example: When setting communication speed to “1: 4800 bps.”
1. Change the AE500 to communication setting mode, and then display the communication speed.
For details, see the 3.1 Transfer to Communication Setting Mode (P. 4) and 3.2
Communication Parameter Selection (P. 5).
Continued on the next page.
SET
ALM4ALM1 ALM2
ALM3
Communication speed