RKS MX25 - Front Fender and Pedal Installation

1.Tool: cross screwdrver.
2.Have the reflector assembled on the
frame. Adjust the degree to have the
reflector n parallel wth the horzon.
3.Usually the front reflector s whte.
1.Tool: a cross screwdrver
2.It affilates your rdng f you nstall
the rng bell on the left sde.
F. Assembly of the front fender
1.Tool: a screwdrver.
2.Screw the front fender n the hole of the
front fork, and then adjust.
1.Tool: a M5 hexagon screwdrver.
2.Lock the lftng eye as the pc, and
then adjust to make t have a
safety dstance wth the tre.
G．Pedal
1. R：Rght; L：Left
2. R: Rght part of the pedal,
L: Left part of the pedal
1.Tool: 15# open spanner.
2.Twst the pedal clockwse.
3.Torque：350KGf.cm-450KGf.cm
(34N.m-44N.m)
10
COMPONENT ADJUSTMENT
MX25