EasyManua.ls Logo

Roadtrek Simplicity 2019 - Climate Control Systems; Thermostat and Air Conditioning; Propane Furnace Operation

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
© Erwin Hymer Group North America, Inc., R00
Heating and Cooling
Thermostat
The thermostat controls the furnace and the air conditioner. (Picture 33.1) Set the thermostat on "heat" or "cool" and set the desired temperature.
The third setting, "fan", recirculates cabin air using the fan inside the air conditioning unit.
Air Conditioning
The air conditioner (AC) provides cooling for your Roadtrek using electric shore power or underhood generator. The AC can be operated normally
when you are plugged in to shore power. (Picture 33.3)
If your Roadtrek is parked on an incline, it is possible for condensate to leak into the living space. If this happens park in a more level
location.
Propane Furnace
The furnace is controlled by the combination thermostat located above the rear bed. (Picture 33.2) The furnace
requires propane and 12 volt power. The furnace can be used without shore power or generator use.
Keep the aisle in front of the furnace clear of any obstructions when using the furnace to allow air circulation.
The furnace can operate when outside temperatures are below freezing.
Thermostat
Propane furnace
Roof-mount air conditioner
Picture 33.1
Picture 33.2
Picture 33.3

Table of Contents

Related product manuals