37
Gobo Carousel Error 1 (Gobo Carousel Error 2 )
The messages will appear after the reset of the gobo carousel 1 if this wheel is not located in the default posi-
tion.
Gobo rotation Error 1 (Gobo Rotation Error 2 )
The messages will appear after the reset of the rotating gobo wheel 1 if the rotating gobos are not located in
the default positions.
Static Gobo Error 1 (Static Gobo Error 2 )
The messages will appear after the reset of the static gobo wheel if this wheel is not located in the default
position.
Faulty battery
The battery on the display board is exhausted and should be replaced immediately.
Vcc 5V failure
The 5V supply failure has appeared.
Vcc 48V failure
The 48V supply failure has appeared.
Lamp Fan 1 (2) Bad, Lamp Off
One of the blowers (Fan 1, Fan 2) cooling the lamp malfunctioned and the lamp was switched off.
Front Fan Bad, Lamp Off.
One of the sucking fans (Fan 6, Fan 7) in the xture head malfunctioned and the lamp was switched off.
Base Fan Bad, Lamp Off
One of the fans (Fan 5, Fan 6) in the xture base malfunctioned and the lamp was switched off.
CMY Fans Bad, Lamp Off
Both fans (Fan 3, Fan 4) in the CMY module in the xture head malfunctioned and the lamp was switched
off.
CMY Fan Bad, Lamp P. Reduced
One of the fans (Fan 3, Fan 4) in the CMY module in the xture head malfunctioned and the lamp power has
been reduced.
Gobo Fan Bad, Lamp P. Reduced
The gobo blower (Fan 5) at gobo wheels in the xture head malfunctioned and the lamp power is reduced when
the gobo wheel 1 (2) or animation wheel is moving into the light beam.
FS Fans Bad, Lamp Off
Both blowers (Fan 11, Fan 12) of the framing shutters module in the xture head malfunctioned and the lamp
was switched off.
FS Fan Bad, Lamp P. Red.
One of the blowers (Fan 11, Fan 12) of the framing shutters module in the xture head malfunctioned and the
lamp power has been reduced.
Arm Fan Bad
The small fan (Fan 8) in the xture arm malfunctioned.
To Next Page
Loading...
