Robe Robin MiniMe - Special Functions (Special)

22
encoded as mp3, video as mpeg2. This le cannot be played. Another AVI le can have audio as ogg vorbis
and video as h264. This le can be played. Whether the Robin MiniMe can play the le or not depends on the
encoding, not on the container.
Mirror Media - This menu allows to load les from the folder intmedia (on the USB memory stick) into the
xture and vice versa.
From Minimi - the option copies custom media les from the xture into USB memory stick
(custom les only).
To Minimi - the option copies custom media les from USB memory stick into the xture.
There is 9.5 GB free space available for custom content in the xture.
Note: Custom media les in the xture memory will be overwritten.
Factory les stay without change.
Mirror Program - This menu allows to load programs from the folder programs (on the USB memory stick)
into the xture and vice versa.
From Minimi - the option copies created programs (menu "St Alone") from the xture into
USB memory stick.
To Minimi - the option copies programs from the USB memory stick into the xture.
Note: Created programs in the xture will be overwritten.
Convert Inter - The option converts custom pictures (only) in the xture into optimal resolution (1280x800
pixels) for the Robe MiniMe. These converted pictures can be copied back to the USB memory stick (option
"Mirror Media").
Delete Int. Me. - This menu delete media les in the xture´s memory.
To copy custom les into xture
1. Connect the MiniMe to the mains.
2. Plug the USB ash drive into the xture.
3. Initialize the USB ash drive (via menu "Init USB") and unplug it.
4. Plug the USB ash drive into computer.
5. Upload content into folder (intmedia) and unplug it.
6. Plug the USB ash drive back into the MiniMe.
7. Mirror content into the MiniMe (only intmedia) via menu "Mirror Media".
8. Unplug the USB ash drive from the MiniMe .
5.8 Special functions (Special)
RDM Low - This menu item shows the rst part of the RDM identication code.
RDM High - This menu item shows the second part of the RDM identication code.
Wireless - Wireless DMX information. The menu allows to read some information about
Wireless DMX operation
Stat - Wireless status. Use the menu to read wireless DMX status.
Unlink - use this item to unlink xture from wireless DMX.
Calib - Calibration menu. The menu allows ne adjustment of the pan, tilt, focus, white colour and Gamma
curve.
Cal PTF - Calibration of pan, tilt and focus.
Pan C - ne calibration of pan
Tilt C - ne calibration of tilt
Focu C - ne calibration of focus
Focu V - version of mechanical focus (should be set once more if
the light source has been changed).
Focu H - setting of focus hysteresis (should be set once more if
the light source has been changed).
Store - saves adjusted values into memory
Cal Col - Calibration of white colour and gamma curve.
Red C - a red saturation setting
Green C - a green saturation setting
Blue C - a blue saturation setting