If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
6
Operating your radio - DAB
1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio. The On/Off indicator
will light and the display will show "Roberts" for a few seconds.
3. If this is the fi rst time the radio is used a quick scan of UK Band III
DAB channels will be carried out, known as Auto-tune. The display
will show "Welcome to DAB".
4. During Auto-tune, the lower line of the display shows a bar graph
indicating progress of auto-tune. If the radio has been used before,
then the last used station will be selected instead of the Auto-tune
process.
5. When the Auto-tune is completed the fi rst station found (in numeric-
alpha order 0...9...A....Z) will be selected.
6. If the station list is still empty after the Auto-tune your radio will display
"No stations available".
7. If no stations are found it may be necessary to relocate your radio to
a position giving better reception.
2
To Next Page
Loading...
