12
DAB
DRC Value
DRC Value *
DRC 0
DRC Value
DRC 1/2
DRC Value
DRC 1
Dynamic Range Control settings - DAB
Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment.
1. Press and release the On / Off button to switch on your radio. Ensure
your radio is in DAB mode.
2. Press and hold the Info button until the Advanced DAB menu is
displayed and then release the Info button.
3. Press the Tuning Up or Down buttons until the display shows 'DRC
Value'.
4. Press and release the Select button to enter adjustment mode.
5. Press the Tuning Up or Down buttons to select the required DRC
setting (the default is 0).
DRC 0 - DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 - DRC level is set to 1/2 that sent by broadcaster.
DRC 1 - DRC is set as sent by broadcaster.
6. Press and release the Select button to confi rm the setting. The display
will return to normal tuning mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
2
3,5
4,6
3,5
1
To Next Page
Loading...
