Roberts RecordR - To view the alarm settings; Cancelling alarms

35
To view the alarm settings
1. Press and hold the Info button.
2. Press the Tuning Up or Down buttons until 'Alarm Set' shows on the
display. Press and release the Select button to enter the alarm setup.
3. Press the Tuning Up or Down buttons to view alarms 1, 2, 3 or 4.
4. Press and release the Select button to cycle through each of the
settings for the chosen alarm.
You may use the Tuning Up and Down buttons to modify any particular
setting if desired, using the Select button to enter the modifi cation.
Cancelling alarms
1. While an alarm is sounding it can be cancelled by pressing the On / Off
button.
1
2,3 2,3
2,4
1