I
0-4
YEARLY
CHECKS
'
AND
MAINTENANCE
I
I
Checks and maintenance works
I
Reasons for requiring the maintenance work
I
Remove
the
carbon deposit, from
the
exhaust
port
and muffler.
Poor operation
of
the engine.
Clean the carburetor.
Poor operation
of
the engine.
10-5
PREPARATION FOR LONG STORAGE
(1) Perform the above maintenance works
10
-
1 through 10
-
4.
(2) Drain fuel from' the tank.
(3)
To
protect cylinder bore from rusting,
pour
a
small amount (2cc)
of
engine oil thr
spark plug hole into the cylinder and pull the recoil starter slowly
2
to
3
times.
ough the
(Do
not
start the engine.)
[NOTE]
Do
.not pour'
too
much oil
or
the oil remaines in the combustion chamber
of
cylinder.
(4)
Pull the recoil starter slowly and
stop
it. at the compression point.
(5)
Clean the engine outside with a oily cloth.
.
'(6)
Put
a
cover over the engine and store it in a dry and well ventilated area.
"
37
-
To Next Page
Loading...
Need help?
General
