-
43
-
5-4-17a CYLINDER BAFFLE, MUFFLER BRACKET and MUFFLER (EH09D)
(1) Temporarily install cylinder baffle, muffler
bracket and blower housing bracket 2 to the
cylinder head.
: M6 flange nut : 2 pcs.
Do not tighten the flange nut fully.
(2) Temporarily install muffler and gasket to cylin-
der head.
: M6 self lock nut : 2 pcs.
: M6 x 12 mm bolt and washer : 2 pcs.
(3) Finally, tighten the self lock nut etc. fully,
according to the following priority.
1 1
1 1
1 M6 self lock nut : 2 pcs.
2 2
2 2
2 M6 x 12 mm bolt and washer : 2 pcs.
3 3
3 3
3 M6 flange nut : 2 pcs.
Fig. 5-41a
MUFFLER CP
MUFFLER
BRACKET CP
BLOWER HOUSING
BRACKET CP 2
M6 x 12 BOLT AND
WASHER AY : 2 pcs.
M6 FLANGE NUT : 2 pcs.
CYLINDER BAFFLE
M6 SELF LOCK
NUT : 2 pcs.
GASKET
(
MUFFLER
)
3
2
1
euqrotgninethgiT
N8.01-8.8 ・m
gk011-09( ・ )mc
tf0.8-5.6( ・ ).bl
To Next Page
Loading...
