Robin EH09D - Page 48

- 44 -
5-4-17b HEAD COVER, MUFFLER BRACKET and MUFFLER (EH12-2D)
(1) Temporarily install head cover and muffler
bracket to cylinder head.
: M6 x 18 mm flange bolt : 2 pcs.
(2) Temporarily install muffler, gasket (muffler) and
spacer (exhaust) to cylinder head.
: M8 self lock nut : 2 pcs.
: M8 x 16 mm bolt and washer : 4 pcs.
(3) Finally, tighten the self lock nut etc. fully,
according to the following priority.
1 1
1 1
1 M8 self lock nut : 2 pcs.
2 2
2 2
2 M8 x 16 mm bolt and washer : 2 pcs.
3 3
3 3
3 M8 x 16 mm bolt and washer : 2 pcs.
4 4
4 4
4 M8 x 18 mm flange bolt : 2 pcs.
Fig. 5-41b
)8M(euqrotgninethgiT
N5.62-5.22 ・m
gk072-032( ・ )mc
tf5.91-5.61( ・ ).bl
)6M(euqrotgninethgiT
N8.01-8.8 ・m
gk011-09( ・ )mc
tf0.8-5.6( ・ ).bl
M8 x 16 BOLT AND
WASHER AY : 2 pcs.
M8 x 16 BOLT AND
WASHER AY : 2 pcs.
M8 WASHER : 2 pcs.
M6 x 18 FLANGE
BOLT : 2 pcs.
M8 SELF LOCK
NUT : 2 pcs.
MUFFLER
SPACER
(
EXHAUST
)
MUFFLER BRACKET
HEAD COVER
GASKET
(
MUFFLER
)
1
A
2
3
4
A