Robin EY18-3 User Manual

14-5
EVERY 500 -600 HOURS (SEMIANUAL) CHECKS and MAINTENANCE
Checks and maintenance
Reasons
for requiring them
Remove cylinder
head and remove carbon
deposit.
The engine will be out of order.
Disassemble and clean carburetor.
14-6
~
EVERY 1000 HOURS (YEARLY) CHECKS and MAINTENANCE
>
Checks and maintenance
Reasons
for requiring them
Perform overhauls, clean
correct or
The engine output drops and become out
replace parts.
of order.
Change piston rings
Replace fuel pipe once
a year.
To prevent- from danger caused by the
fuel leakage.
14-7 PREPARATION for LONG-TERM STORAGE
1) Perform the above 13-1 and 13-2 maintenance jobs.
2) Drain fuel from the fuel tank and carburetor float chamber.
3) To prevent rust in the cylinder bore, apply oil through the spark plug hole and turn the
crankshaft several turns by hand. Re-install the plug.
4) Turn the starting pulley by hand and leave it where the resistance is the heaviest.
5) Clean the engine outside with oiled cloth.
6) Put a vinyl or other cover over the engine and store the engine in dry place.
-49 -

Robin EY18-3 Specifications

General

Brand	Robin
Model	EY18-3
Category	Engine
Language	English