– 41 –
4) When . . .
(1)The spring pops out
(a)Hook the end hook of the spring to the notched
part of the reel, and attach the spring, applying
pressure with your fingers so that it isn’t released
from the groove. (Please wear gloves)
(b)Hook the inside hook of the spring to the claw of
the starter case while turning.
※ Please refer to assembly procedures.
(2) Oil refill
At the end of the season or when disassembling, add
grease (preferably one that is heat resistant, if
possible) or mobile oil to rotation parts, friction parts,
and the spring.
To Next Page
Loading...
Need help?
General
