Connect the Power Supply unit to a regular power outlet.
LED indication
Now you should see the LED indication on the Base Station
blinking green (if the mower is outside), or steady green (if the
mower is inside the Base Station).
The Extension Cable from the Power Supply to the Base
Station should be securely fastened to the ground! It
should never present a tripping hazard.
The Extension Cable should cross ONLY over soft
surfaces. It should not cross over hard surfaces (e.g.,
sidewalk, driveway) where it cannot be securely fastened.
Caution
Just one
more step
to go...;)
To Next Page
Loading...
