EasyManua.ls Logo

Robomow RX20 Pro - Page 41

Robomow RX20 Pro
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
39
Enabling child protection
Child protection prevents accidental use of the mower by little
children. When child protection is enabled, the mower will
require a special combination to start a mowing operation or
to go back to its base.
To enable child protection, press and hold the GO + STOP
buttons together for 6 seconds.
If you wish to disable child protection, press
and hold the GO + STOP buttons together for 6
seconds again.
Alternatively, child protection can be enabled
or disabled conveniently via the mobile app (not
applicable to models for lawns under 200 m
2
/
2150 ft
2
).
Powering up
To power up your mower, press and hold the GO button for 2
seconds until the ON/OFF indication is lit.
When you need to switch it off, simply press and hold GO
button for 2 seconds, until the ON/OFF indication goes off.
Note: If the theft protection
is enabled(not applicable
to models for lawns under
200 m
2
/ 2150 ft
2
), you will
need to unlock your mower
via the mobile app before
you can switch it off.
2 seconds
6 seconds

Other manuals for Robomow RX20 Pro

Related product manuals