Routine Maintenance
Side Brush
* Clean monthly
1.Turn the robot over and remove the screw holding the
Side Brush.
2.Remove and clean the Side Brush.
3.Reinstall the Side Brush and tighten the screw.
Note:
It is recommended to replace the Side Brush every 3-6 months to maintain the
cleaning quality.
Mop cloth
* Clean after use
1. Remove the mop cloth from the mopping module.
2. Clean and dry the mop cloth.
Note:
• Always remove the mop cloth after cleaning to filter blockage.
• If the mop cloth gets excessively dirty,the cleaning quality will be affected.
Always use a clean cloth.
• Replacing the mop cloth every 3-6 months is recommended to maintain
cleaning quality.
Note:
Changing filters every 1-3 months is recommended, depending on the quality
of water and frequency of use, to ensure cleaning quality.
Filter assembly
* Replacement every 1-3months is recommended
1. Move your finger along the notch to remove both filters.
2. Install the new filters.
18
To Next Page
Loading...
