Roborock S6 Pure User Manual

12
Installation
Connect to the app
5. Connect to the app. (recommended)
Download the Roborock app or Xiaomi home app
a. Search "Roborock" in the App Store or Google Play, Or
scan the QR code below, then download and install the app.
b. Search "Xiaomi home" in the App Store or Google Play, Or
scan the QR code below, then download and install the app.
Reset WiFi
a. Open the top cover of the robot to reveal the WiFi
indicator light.
b. Press and hold the
button and the button until you
hear the "Reset WiFi" voice alert. When the WiFi indicator
light is flashing slowly, the robot has entered network
configuration mode.
Note:
If you cannot connect your phone to the robot, reset the WiFi, and add your robot as
a new device.
Add device
Open the app and click "+" in the top right corner, then
follow the instructions in-a pp. Once your robot has been
added, it will be found in a list on the homepage.
Note:
• Due to ongoing app development, the actual process may dier slightly from the
above description. Always follow the instructions given in the app.
• Only 2.4GHz WiFi is supported.
WiFi indicator light
• O: WiFi disabled
• Slow flashing: Waiting for
connection
• Fast flashing: Connecting
• Steady: WiFi connected

Roborock S6 Pure Specifications

General

Suction Power	2000 Pa
Battery Capacity	5200 mAh
Dustbin Capacity	460 ml
Water Tank Capacity	180 ml
Navigation	LDS Laser Navigation
Runtime	Up to 150 minutes
Virtual Barriers	Yes
Multi-Level Mapping	Yes
Scheduled Cleaning	Yes
Charging Time	Approximately 6 hours
Weight	3.2 kg
Connectivity	Wi-Fi
Compatible Floor Types	Hardwood, Tile, Carpet
Voice Control	Yes
Dimensions	350 x 350 x 96.5 mm (13.8 x 13.8 x 3.8 inches)